Validity of Flip PDF Based E-Modules as Learning Media on Cube and Cuboid Materials
DOI:
https://doi.org/10.31980/mosharafa.v13i4.965Keywords:
E-Module, Flip PDF, Cube and Cuboid, Mathematical Literacy, Learning Media, Kubus dan Balok, Literasi Matematis, Media PembelajaranAbstract
Abstrak
Penelitian ini bertujuan untuk mengetahui validitas e-modul Berbasis Flip PDF sebagai Media Pembelajaran Untuk Melatih Kemampuan Literasi Matematis Siswa Pada Materi Kubus dan Balok dilihat dari validitas sistem operasi, validitas isi, validitas bahasa dan desain. Penelitian ini menggunakan jenis penelitian Research and Development (R&D) yang mengacu pada model pengembangan Plomp yang terdiri atas 3 (tiga) tahapan, yaitu tahap preliminary research (fase investigasi awal), tahap prototyping phase (pembuatan dan pengembangan prototipe) dan tahap assesment phase (fase penilaian). Namun artikel ini hanya membahas sampai tahapan prototyping phase. Instrumen yang digunakan adalah lembar validasi, angket dan wawancara. Berdasarkan hasil validasi menunjukkan bahwa E-modul Interaktif yang dikembangkan memperoleh persentase rata-rata 87,5% untuk validitas sistem operasi termasuk kategori sangat valid, 80% untuk validitas isi termasuk kategori sangat valid, 90% untuk validitas bahasa termasuk kategori sangat valid dan 85,9 % untuk validitas desain termasuk kategori sangat valid untuk digunakan sebagai media pembelajaran untuk melatih kemampuan literasi matematis siswa.
Abstract
This research aims to determine the validity of the Flip PDF-based e-module as a learning medium for training students' mathematical literacy skills in cube and block material in terms of operating system validity, content validity, language validity and design. This research uses the Research and Development (R&D) type of research which refers to the Plomp development model which consists of 3 (three) stages, namely the preliminary research stage (initial investigation phase), the prototyping phase (prototype creation and development) and the assessment phase (assessment phase). However, this article only discusses the prototyping phase. The instruments used were validation sheets, questionnaires and interviews. Based on the validation results, it shows that the Interactive E-module developed obtained an average percentage of 87.5% for operating system validity including the very valid category, 80% for content validity including the very valid category, 90% for language validity including the very valid category and 85 .9% for design validity is in the very valid category for use as a learning medium to train students' mathematical literacy skills.
References
Asrial, Syahrial, Kurniawan, D. A., Chan, F., Septianingsih, R., & Perdana, R. (2019). Multimedia innovation 4.0 in Education: E-modul ethnoconstructivism. Universal Journal of Educational Research, 7(10), 2098–2107. https://doi.org/10.13189/ujer.2019.0 71007
Inanna, Nurjannah, Ampa, A. T., & Nurdiana. (2021). Modul Elektronik ( E- Modul ) Sebagai Media Pembelajaran Jarak Jauh. Seminar Nasional Lembaga Penelitian Dan Pengabdian Kepada Masyarakat Universitas Negeri Makassar, 1232–1241.
Kamila, A., Fadiawati, N., & Tania, L. (2018). Efektivitas Buku Siswa Larutan Penyangga Berbasis Representasi Kimia dalam Meningkatkan Pemahaman Konsep. Jurnal Pendidikan Dan Pembelajaran Kimia, 7(2), 211–222.
Komikesari, H., Mutoharoh, M., Dewi, P. S., Utami, G. N., Anggraini, W., & Himmah, F. (2020). Development of e-module using flip pdf professional on temperature and heat material. Journal of Physics: Conference Series, 1572(1).
Maulana, I., Suryani, N., & Asrowi, A. (2019). Augmented Reality: Solusi Pembelajaran IPA di Era Revolusi Industri 4.0. Proceedings of The ICECRS, 2(1), 19–26. https://doi.org/10.21070/picecrs.v2i1. 2399
Miranda, J., Navarrete, C., Noguez, J., Molina-Espinisa, J.-M., Ramirez- Montoya, M.-S., Navarro-Tuch, S. A., Bustamante-Bello, M.-R., Rosas- Fernandez, J.-B., Molina, A. (2021). The core components of education 4.0 in higher education: Three case studies in engineering education. Computers and Electrical Engineering, 93, 107278. http://doi.org/10.1016/j.compeleceng.2021.107278
Nasution, M. A., Rosjanuardi, R., & Kurniawan, S. (2023). Kemampuan Pemecahan Masalah Matematis Siswa SMP pada Materi Bangun Ruang Sisi Datar: Systematic Literature Review. Jurnal Pembelajaran Matematika Inovatif , 6(4), 1685–1698. https://doi.org/10.22460/jpmi.v6i4.17 889
Nugroho, M., Sumardjoko, B., & Fathoni, A. (2023). Development of Science Learning EModules Using the Flip PDF Application. Jurnal Paedagogy, 10(2), 525-535. https://doi.org/10.33394/jp.v10i2. 7130
Nurvita, D., Akhsan, H., Muslim, M., & Ariska, M. (2022). Development of digital handout of quantum mechanics no spin and quantum mechanics with spin using professional pdf flip app. Journal of Physics: Conference Series, 2165(1). https://doi.org/10.1088/1742- 6596/2165/1/012010
Plomp, T., & Nieveen, N. (2007). An introduction to educational design research. Proceedings of the Seminar Conducted at the East China Normal University, Shanghai (PR China), 23.
Rama, A., Putra, R. R., Huda, Y., & Lapisa, R. (2022). Pengembangan E-Modul Menggunakan Aplikasi Flip Pdf Professional Pada Mata Kuliah Analisis Kurikulum Pendidikan Dasar. JRTI (Jurnal Riset Tindakan Indonesia), 7(1), 42. https://doi.org/10.29210/300314730 00
Riduwan. (2015). Skala Pengukuran Variabel-Variabel Penelitian. Alfabeta.
Sony, M., & Naik, S. (2020). Industry 4.0 integration with socio-technical systems theory: A systematic review and proposed theoretical model. Technology in Society, 61. https://doi.org/10.1016/j.techsoc.202 0.101248
Syahrul, Y. (2019). Penerapan Design Thinking Pada Media Komunikasi Visual Pengenalan Kehidupan Kampus Bagi Mahasiswa Baru Stmik Palcomtech dan Politeknik Palcomtech. Jurnal Bahasa Rupa, 2(2), 109–117. https://doi.org/10.31598/bahasarupa. v2i2.342
Tikhonova, E., & Raitskaya, L. (2023). Education 4.0: The Concept, Skills, and. 9(1), 5–11.
Wan Jusoh, W. N. H., & Jusoff, K. (2009). Using multimedia in teaching Islamic studies. Journal Media and Communication Studies, 1(5), 86–94.
Warsito, Siregar, N. C., Gumilar, A., & Rosli, R. (2023). STEM for the 21st Century: Building a Stronger Workforce for the Digital Age. Mosharafa: Jurnal Pendidikan Matematika, 12(4), 879-894.
Widyatama, A., & Pratama, F. W. (2022). Pengembangan Mobile Learning PINTHIR Berbasis Android sebagai Sumber Belajar dan Sarana Mengerjakan Soal Trigonometri SMA. Mosharafa: Jurnal Pendidikan Matematika, 11(1), 25-36.
Yastini, Y. N., Nurdian, A. R., & Wikanengsih. (2018). Kemampuan Penggunaan Bahasa Baku Mahasiswa Program Studi Bahasa Indonesia Ikip Siliwangi. Parole: Jurnal Pendidikan Bahasa Dan Sastra Indonesia, 1(5), 659–664.
Zahwa, A., Dzikro, T., Dwiningsih, K., Studi, P., & Kimia, P. (2021). Feasibility of Virtual Laboratory-Based Learning Media in The Third Period Sub- Material Chemistry Element. Chemistry Education Practice, 4(2), 161–170. https://doi.org/10.29303/cep.v4i2.23 89
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Mosharafa: Jurnal Pendidikan Matematika
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
